Publications

Books

Materials Science of Polymers for Engineers Osswald,T.A. and G. Menges:
Materials Science of Polymers for Engineers, 3nd Edition
Hanser Verlag, München, 2012.
Understanding Polymer Processing Osswald, T.A.:
Understanding Polymer Processing
Hanser Verlag, München, 2010.
Pruebas y Caracterizacíon de los Plásticos Sierra, J., Naranjo, A, Noriega, M., Osswald, T.A., Roldán, A.:
Pruebas y Caracterizacíon de los Plásticos - Aplicaciones Industriales
Editorial Guaduales, Cucuta, 2010.
Ciencia de Polímeros para Ingenieros Osswald, T.A., Menges, G., Flórez, J., Flórez, L.:
Ciencia de Polímeros para Ingenieros
Editorial Guaduales, Cucuta, 2010.
Polymer Testing and Characterization Naranjo, A, Noriega, M., Osswald, T.A., Roldán, A. and Sierra, J.:
Plastics Testing and Characterization - Industrial Applications
Hanser Verlag, München, 2008.
Procesado de Polímeros Osswald, T.A., Giménez, E.:
Procesado de Polímeros
Editorial Guaduales, Cucuta, 2008.
Tecnologíca de los Plástiocos - Extrusión Naranjo/Noriega/Sanz/Sierra/Osswald:
Tecnologíca de los Plásticos, Manual de Bolsillo 1, Extrusión
Editorial Guaduales, Cucuta, 2008.
Tecnologíca de los Plástiocos - Inyección Naranjo/Noriega/Sanz/Sierra/Osswald:
Tecnologíca de los Plásticos, Manual de Bolsillo 2, Inyección
Editorial Guaduales, Cucuta, 2008.
Saechtling Kunststoff-Taschenbuch Osswald, T.A., Schmachtenberg, E. and Baur, E.:
Kunstoff-Taschenbuch
Hanser Verlag, München, 2007.
Injection Molding Handbook Osswald,T.A., Turng, L.-S., and P.J. Gramann:
Injection Molding Handbook, 2nd Edition
Hanser Verlag, München, 2007.
International Plastics Handbook Osswald, T.A., Schmachtenberg, E. and Baur, E.:
International Plastics Handbook
Hanser Verlag, München, 2006.
Polymer Processing - Modeling and Simulation Osswald, T.A. and Hernandez, J.P:
Polymer Processing - Modeling and Simulation
Hanser Verlag, München, 2006.
Injection Molding Handbook Osswald, T.A., Turng, L., Gramann, P.J.:
Injection Molding Handbook - Russian Translation
2006.
Injection Molding Handbook Osswald, T.A., Turng, L., Gramann, P.J.:
Injection Molding Handbook - Chinese Translation
2006.
Injection Molding Handbook Osswald,T.A., Turng, L.-S., and P.J. Gramann:
Injection Molding Handbook
Hanser Verlag, München, 2001.
Materials Science of Polymers for Engineers Osswald,T.A. and G. Menges:
Materials Science of Polymers for Engineers, 2nd Edition
Hanser Verlag, München, 2003.
Compression Molding Davis, B.A., Gramann, P.J., Osswald, T.A., and Rios, C.A.:
Compression Molding
Hanser Verlag, München, 2003.
Extrusion Processing Data Naranjo/Noriega/Sierra/Sanz:
Extrusion Processing Data, Plastics Pocket Power Series
T.A. Osswald, Editor,
Hanser Publishers, Munich, 2001
Injection Molding Processing Data Naranjo/Noriega/Sierra/Sanz:
Injection Molding Processing Data, Plastics Pocket Power Series
Osswald, T.A. Editor,
Hanser Publishers, Munich, 2001
Extrusion Blow Molding Thielen:
Extrusion Blow Molding, Plastics Pocket Power Series
Osswald, T.A. Editor,
Hanser Publishers, Munich, 2001
Welding Benatar/Grewell/Bonten/Tuechert:
Welding, Plastics Pocket Power Series
Osswald, T.A. Editor,
Hanser Publishers, Munich, 2001
Aging and Chemical Degradation Bonten:
Aging and Chemical Degradation, Plastics Pocket Power Series
Osswald, T.A. Editor,
Hanser Publishers, Munich, 2001
Applied Rubber Technology DeGreiff/Naranjo/Castaño:
Applied Rubber Technology, Plastics Pocket Power Series
Osswald, T.A. Editor,
Hanser Publishers, Munich, 2001
Material Science of Polymers for Engineers Osswald, T. A., Menges, G.:
Material Science of Polymers for Engineers
2001
Polymer Processing Fundamentals Osswald, T.A.:
Polymer Processing Fundamentals
Carl Hanser Verlag, München, 1998.
Materials Science of Polymers for Engineers Osswald,T.A., G. Menges:
Materials Science of Polymers for Engineers
Carl Hanser Verlag, München, 1996.
the book's Japanese edition appeared in 1997, and Korean edition in 1999.
An Introduction to Experimental Analysis of Stress and Strain Comer, J.J., T.A. Osswald, R.L. Pendleton:
An Introduction to Experimental Analysis of Stress and Strain
SDSM & T Press, 1983.

Refereed Journal Publications

78 Garcia, S.;
Puentes, J.;
Li, X.C.;
Osswald, T.A.
“Prediction of Vortex Height from Mechanical Mixing in Metal Matrix Nanocomposite Processing by Means of Dimensional Analysis and Scaling”
Journal of Manufacturing Processes, 01/2014
77 Möbius, T.;
Eilbracht, S.;
Rudolph, N.;
Osswald, T.A.
“Analysis of fiber orientation and fiber matrix separation in a compression molding process with an equibiaxial flow front”
Journal of Plastics Technology 10, 2, pp. 100-128, (2013)
76 Osswald, T.A.;
Aquite, W.;
Ramírez, D.;
López, L.;
Puentes, J.;
Pérez, C.;
García Rodríguez, S.
“Retos en la Industria de Procesamiento de Plásticos y Compuestos,”
DYNA, 79, (10) 20-28 (2012)
75 Restrepo Zapata, N.C.;
Osswald, T.A.;
Hernández Ortiz, J.P.,
“Cinética de Curado de un Caucho EPDM y una Resina Epoxídica Alifática - Modelamiento y Análisis sin y con Difusión”
Revista Iberoamericana de Polímeros, 16 (6) 245-254 (2012)
74 Holmes, L.;
Favero, J.;
Osswald, T.A.
“Modeling Viscoelastic Secondary Flows in Three- Dimensional Noncircular Ducts”
Polymer Engineering and Science, DOI 10.1002/pen (2012)
73 Hsu, C.L.;
Turng, L.S.;
Osswald, T.A.;
Rudolph, N.;
Dougherty, E., et al.
“Effects of Pressure and Supercritical Fluid on Melt Viscosity of LDPE in Conventional and Microcellular Injection Molding”
International Polymer Processing, 27 (1) 18-24 (2012)
72 Holmes, L.;
Favero, J.;
Osswald, T.A.
“Numerical simulation of threedimensional viscoelastic planar contraction flow using the software OpenFOAM,”
Computers and Chemical Engineering (37) 64-73 (2012)
71 Osswald, T.A. “An Educational and Scientific Renaissance in Colombia - A Strong Start of the 21st Century”
DYNA-COLOMBIA, 78 (170): 5-6 (2011)
70 Aquite, W.;
Osswald, T.A.
“Producción de micropellets para procesos de sinterizado”
Avances - Investigación en Ingeniería (15) 97-102 (2011)
69 Rudolph, N.;
Osswald, T.A.;
Ehrenstein, G.W.
"Influence of Pressure on Volume, Temperature and Crystallization of Thermoplastics during Polymer Processing"
International Polymer Processing (26) 3, 239-248 (2011)
68 Londoño, A. ;
Osswald, T.A.;
Hernandez, J.P.
“Modeling the Behavior of fiber suspensions in the Molding of Polymer Composites”
J.Reinf.Plast.& Comp., (30), 781-790 (2011)
67 Feulner, R.;
Brocka, Z.;
Seefried, A.;
Kobes, M.;
Hülder, G.;
Osswald, T.A.
“The effects of e-beam irradiation induced cross linking on the friction and wear of polyamide 66 in sliding contact”
Wear, (268), 7-8, 905-910 (2010)
66 Hernández, J.P.;
Osswald, T.A.
"Modeling Processing of Silicone Rubber: Liquid Versus Hard Silicone Rubbers"
Journal of Applied Polymer Science, (119), 1864-1871, 2011
65 Stark, N.;
White, R.H.;
Mueller, S.A.;
Osswald, T.A.
"Evaluation of Various Fire Retardants for Use in Wood Flourepolyethylene Composites"
Polymer Degradation and Stability, (95) pp. 1903-1910, 2010
64 Beiss, T.;
Menacher, M.;
Feulner, R.,
Hülder, G.;
Osswald, T. A.
"Vibration Joining of Fiber-Reinforced Thermosets"
Polymer Composites, 31, 7, p. 1205-1212, 2010
63 Londoño, A.;
Osswald, T.A.
"Modeling of the Fiber Jamming Phenomena during Processing of Fiber-Reinforced Composite Parts"
Key Eng. Mater., (425), 33, 2010
62 Hernández, J.P.;
Osswald, T.A.
"Modeling Processing of Silicone Rubber: Liquid Versus Hard Silicone Rubbers"
Journal of Applied Polymer Science, Accepted for Publication (2010)
61 Beiss, T.
Menacher, M.;
Feulner, R.;
Hülder, G.;
Osswald T. A.
"Kleben von duroplastischen Verbundwerkstoffen - Kurzer Prozess dank Vibrationsschweißtechnik"
Adhassion, Kleben und Dichten, 10, 22, 2008
60 García, S.;
Roldán, A.;
Osswald, T.A.
"Thin-Walled Injection Molding - A Dimensional and Scaling Analysis Approach"
J. Plastics Tech., 4, 5, 2008
59 Roldán, A.;
Weiben, O.;
Haughton, V.;
Chesler, N.;
Osswald T.A.
"Characterization of CSF hydrodynamics in the presence and absence of tonsilar ectopia by means of computational flow analysis (CFA)"
Submitted for publication to the Americal Journal of Neuroradiology, 2008
58 Ralston, B.;
Osswald, T.A.
"Viscosity of soy protein plastics determined by screw-driven capillary rheometry"
J. of Polym. Environ., (3), 16, 2008
57 Cruz, J.C.;
Osswald, T.A.
"Precise Curing Analysis of Highly Accelerated Unsaturated Polyester Reactions"
J. Plastics Tech., 4, 3, 2008
56 Lopez-Gomez, I.;
Estrada, O.;
Osswald, T.A.
"Radial Basis Functions Interpolation for Non-Isothermal Non-Newtonian Flow, Considering Viscous Dissipation and Inertia Effects"
International Journal of Numerical Methods for Heat and Fluid Flow, 2007
55 Lopez-Gomez, I.;
Estrada, O.;
Osswald, T.A.
"Modeling and Simulation of Polymer Processing Using the Radial Functions Method"
J. Plastics Tech., (3), 2, 2007
54 Lopez, L.M.;
Cosgrove, A.B.;
Hernandez, J.P.'
Osswald, T.A.
"Modeling the Vulcanization Reaction of Silicone Rubber"
Polymer Engineering & Science, (47) 5, 675-683, 2007
53 Londoño, A.;
Hernandez, J.P.;
Osswald, T.A.
"Mechanisms of Fiber-Matrix Separation in Ribbed Compression Molded Parts"
J. Polym. Composites, (4), 4, 451-457, 2007
52 Roldán, A.;
Chesler, N.;
Osswald, T.A.
"Simulation of Blood Flow Through Mechanical Heart Valves Using The Boundary Elements Method"
Engineering Analysis with Boundary Elements. 2007
51 Londoño, A.:
Osswald, T.A.
"Fiber Jamming and Fiber Matrix Separation During Compression Molding"
J. Plastics Tech., (5), 1, 2006
50 Hernandez, J.P.;
Osswald, T.A.
"A Novel Cure Reaction Model Fitting Technique Based on DSC Scans"
J. Polym. Eng., 25 (1), 2005
49 Hernandez, J.P.;
Osswald, T.A.
"Domain Grid Superposition Technique for Nonlinear BEM"
Engineering Analysis with Boundary Elements, 2004
48 Hernandez, J.P.;
Raush, T.;
Rios, A.;
Strauss, S.;
Osswald, T.A.
"Theoretical analysis of fiber motion and Loads during flow"
J. Polymer-Composites, 25, (1), 1-11, 2004
47 Noriega, M.P.;
Osswald, T.A.;
Ferrier, N.J.
"In-Line Measurement of the Polymer Melting Behavior in Single Screw Extruders"
J Polymer Engineering, 24, (6), 557-578, 2004
46 Hernandez, J.P.;
Osswald T.A.;
Weiss, D.A.
"Simulation of Viscous 2D-Planar Cylindrical Geometry Deformation Using DR-BEM"
International J. Num. Methods Heat & Fluid Flow, 13 (5-6), 698-719, 2003
45 Osswald, T.A. "Verarbeitungsprozesse mit Modellen beschrieben"
Kunststoffe, (93), 10, 130-134, 2003
44 Black Nembhard, H.;
Ferrier, N.J.;
Osswald, T.A.;
Sanz-Uribe, J.R.
"An Integrated Model For Statistical and Vision Monitoring in Manufacturing Transitions"
Quality and Reliability Engineering International, 6 (19), 461-476, 2003
43 Hernandez, J.P.;
Raush, T.;
Rios, A.;
Strauss, S.;
Osswald T.A.
"Analysis of fiber damage mechanisms during processing of reinforced polymer melts"
Engineering Analysis with Boundary Elements, 26, 7, 89, 2002
42 DeRose, A.N.;
Yuan, M.;
Osswald, T.A.;
Castro J.M.
"Simulation of Resin Flow During Compression of Copper-Clad Thermoset Composite laminates"
J. Polymer-Plastics Technology and Engineering, 41, 3, 383-405, 2002
41 Yuan, M.;
Osswald, T.A.;
Castro, J.M.
"Simulation of a Continuous Copper-Clad Thermoset Composite laminate Manufacturing Process"
J. Polymer-Composites, 2002
40 Sierra, J.D.;
Noriega, M.D.;
Osswald, T.A.
"Effect of Metallocene Polyethylene on Heat Sealing Properties of Low Density Polyethylene Blends"
J. Plast. Film Sheet 16, 33, 2000
39 Krawinkel, S.;
Bastian, M.;
Osswald, T.A.;
Potente, H.
"Gleichdrall-Doppelschneckenextruder Strömungssimulation mit BEM"
Plastics Special, 12, 30, 2000
38 Rios, A.C.;
Osswald, T.A.
"Novel BEM Simulation of Mixing in Polymer Flows Including Non-Linear Effects"
J. of Reinforced Plastics and Composites, 19, 1474, 2000
37 Rios, A.C.;
Osswald, T.A.
"Comparative Study of Rhomboidal Mixing Sections Using the Boundary Element Method"
Engineering Analysis with Boundary Elements, 24, 89, 2000
36 Rios, A.C.;
Osswald, T.A.;
Gramann, P.J.;
Noriega, M.P.
"Experimental and Numerical Study of Rhomboidal Mixing Sections"
Int. J. Polym. Proc., 15, 12, 2000
35 Theriault, R.P.;
Osswald, T.A.;
Castro, J.M.
"Measurement and Prediction of the Glass Transition Temperature during the Processing of Copper-Clad Epoxy Laminates"
Polymer Composites, 20, 789, 1999
34 Theriault, R.P.;
Osswald, T.A.;
Castro, J.M.
"A Numerical Model of the Viscosity of an Epoxy Prepreg Resin System"
Polymer Composites, 20, 628, 1999
33 Theriault, R.P.;
Osswald, T.A.;
Castro, J.M.
"Processing Induced Residual Stress in Asymmetric Laminate Panels"
Polymer Composites, 20, 493, 1999
32 Gramann, P.J.;
Rauwendaal, C.;
Osswald, T.A.;
Tellez, G.
"Kinematics of Flow in Single Screw Extruders"
Int. J. Polym. Proc., 1999
31 Hutchinson, B.;
Rios, A.C.;
Osswald, T.A.
"Modeling the Distributive Mixing in an Internal Batch Mixer"
Int. J. Polym. Proc., 16, 315, 1999
30 Osswald, T.A.;
Baur, E.
"BEM in der Kunststoffverarbeitung - Ein Überblick (BEM in Polymer Processisng - A Review)"
Kunststoffe, 89, 2, 1999
29 Osswald, T.A.;
Noriega, M.D.;
Gramann, P.J.;
Davis, B.A.
"Grooved Feed Single Screw Extruders"
Polym. Eng. Sci., 38, 7, 1998
28 Gramann, P.J.;
Rios, A.C.;
Osswald, T.A.
"Comparative Study of Mixing in corotating Twin Screw Extruders Using Computer Simulation"
Adv. Poly. Tech. 17, 107, 1998
27 Theriault, R.P.;
Buchmann, M.;
Osswald, T.A.
"Polymer Flow Length Simulation during Injection Mold Filling"
accepted for publication in Polym. Eng. Sci.37, 3, 667- 671, 1997
26 Stradins, L. U.;
Osswald, T.A.
"Predicting the Effect of Viscosity Ratios on the Mixing of Polymer Blends Using the Boundary Element Method"
Polym. Eng. Sci., 36, 979-984, (1996)
25 Stradins, L.U.;
Osswald, T.A.
"Simulating the Flow of Multi-Domain Systems Usingthe Boundary Element Method"
Engineering Analysis with Boundary Elements,(16), 3, 197-202, 1995
24 Davis, B.A.;
Gramann, P.J.;
Mätzig, J.C.;
Osswald, T.A.
"The Dual Reciprocity Method for Heat Transfer in Polymer Processing"
Engineering Analysis with Boundary Elements, (13), 3, 249-261, 1994
23 Ankenman, B.;
Bisgaard, S.;
Osswald, T.A.
"Experimental Optimization of Computer Models of Manufacturing Processes"
Manufact. Review, (7), 4, 332-345, 1994
22 Tseng, S.C.;
Osswald, T.A.
"Predicting Shrinkage and Warpage of Fiber Reinforced Composite Parts"
Polymer Composites, (15), 4, 270-277, 1994
21 Osswald, T.A.;
Sun, E.M.;
Tseng, S.C.
"Experimental Verification on Simulating Shrinkage and Warpage of Thin Compression Moulded SMC Parts"
Polym. & Polym. Compos., (2), 3, 187, 1994
20 Tseng, S.C.;
Osswald, T.A.
"Prediction of Shrinkage and Warpage of Thin Fiber Reinforced Thermoset Composite Parts"
J. Reinf. Plast. Comp., (13), 8, 698, 1994
19 Mohammed, R.K.;
Osswald, T.A.;
Spiegelhoff, T.J.;
Sun, E.M.
"Modeling and Simulation of High Reynolds Number Flows During Reaction Injection Mold Filling"
Int. J. Polym. Proc., 1994
18 Tseng, S.C.;
T.A. Osswald, T.A.
"Predicting Shrinkage and Warpage of Thin Compression Molded Fiber Reinforced Composite Parts"
SAMPE Quarterly, (24), 4, 40, 1993
17 Gramann, P.J.;
Stradins, L.;
Osswald, T.A.
"Flow and Heat Transfer Simulation of the Mixing of Polymer Blends Using the Boundary Element Method"
Int. J. Polym. Proc., (8), 4, 287-293, 1993
16 Gramann, P.J.;
Mä;tzig, J.C.;
Osswald, T.A.
"Simulating the Non-isothermal Mixing of Polymer Blends Using the Boundary Element Method"
J. of Reinf. Plast. & Composites, 12, 7, 787-799, 1993
15 Cohnen, W.;
Osswald, T.A.
"Der Werkzeug-Füllvorgang im RIM-Verfahren (Mold filling of the RIM Process)"
Kunststoffe, 82, 11, 1127-1130, 1992
14 Gramann, P.J.;
Osswald, T.A.
"Simulating Polymer Mixing Processes Using the Boundary Element Method"
Kunststoffe, 82, 11, 1127-1130, 1992
13 Igl, S.A.;
Osswald, T.A
"Thermoforming Simulation of Natural Fiber Filled Polyolefins"
J. of Plastic Film and Sheeting, 8, 4, 302-332, 1992
12 Cohnen, W.;
Osswald, T.A.
"Experimental Study of High Reynolds' Number Flows Between Narrow Gaps"
Int. J. Polym. Proc., VII, 4, 314-319, 1992
11 Saßmannshausen, W.;
Essig, W.;
Osswald, T.A.
"Predicting the Density in Pressed Charges Using the Finite Element Analysis"
Propell Explos., Pyrothec, 16, 73-80, 1991
10 Osswald, T.A. "A Finite Element Analysis of the Thermomechanical Behavior of Fiber Reinforced Composites"
J. Thermoplastic Composite Materials, 4, 173-189, 1991
9 Osswald, T.A.;
Tucker, C.L.
"Compression Mold Filling Simulation for Non-Planar Parts Using the Finite Element/Control Volume Approach"
Internat. Polym. Process., 5, 2, 79-87, 1990
8 Michaeli, W.;
Mahlke, M.;
Osswald, T.A.; Nöhlke, M.
"Simulation des Fließens bei SMC (Flow Simulation for SMC)"
Kunststoffe, 80, 6, 717-721, 1990
7 Michaeli, W.;
Mahlke, M.;
Osswald, T.A.
"Analyze Messungen und Simulation des Fließens von SMC mit einem Preßrheometer (Analysis, Measurements and Simulation of the Flow of SMC Using a Compression Rheometer)"
Kunststoffe, 80, 1, 70-74, 1990
6 Michaeli, W.;
Hammes, V.;
Kirberg, K.;
Kötte, R.;
Osswald, T.A.;
Specker, O.
"Prozeßsimulation beim RTM-Verfahren (Simulation of the RTM Process)"
Kunststoffe, 79, 8, 739-42, 1989
5 Michaeli, W.;
Hammes, V.;
Kirberg, K.;
Kötte, R.;
Osswald, T.A.;
Specker, O.
"Das RTM-Verfahren - Technologie und Anwendungsgebiete (RTM Process, Technology and Applications)"
Kunststoffe, 79, 7, 586-89, 1989
4 Saßmannshausen, U.;
Essig, W;
Osswald, T.A.;
"The Density Distribution in Pressed Charges: An Analytical Approach"
Propell., Explos., Pyrothec, 14, 24-27, 1989
3 Osswald, T.A.;
Tucker, C.L.
"A Boundary Element Simulation of Compression Mold Filling"
Polym. Eng. Sci., 28, 413-420, 1988
2 Barone, M.R.;
Osswald T.A.
"A Boundary Element Analysis of Flow in Sheet Molding Compound"
Polymer Composites, 9, 158-164, 1988
1 Barone, M.R.;
Osswald, T.A.
"Boundary Integral Equations for Analyzing the Flow of Chopped Fiber Reinforced Polymer Compound in Compression Molding,"
J. Non-Newt. Fluid. Mech., 26, 185-206, 1987

Conference Papers

176 N. C. Restrepo-Zapata;
J. P. Hernandez-Ortiz;
T. A. Osswald
”Modeling of OBSH Decomposition Kinetics as Blowing Agent of Cellular EPDM Rubber”
SPE ANTEC (2014)
175 J. Puentes;
C. Aumnate;
T. A. Osswald
”Understanding PA11 Behavior Via Rheology and Modeling”
SPE ANTEC (2014)
174 H. Mazhar;
J. Bollmann;
E. Forti;
A. Präger;
T. A. Osswald;
D. Negrut
”Studying the Effect of Powder Geometry on the Selective Laser Sintering Process”
SPE ANTEC (2014)
173 D. Ramirez;
A. Bechara;
J. Onken;
T. A. Osswald
”Study of the Fiber Motion in the Fountain Flow Region”
SPE ANTEC (2014)
172 W. Aquite;
J. Kettemann;
A. Tapia;
G. Yilmaz;
T. A. Osswald
”Property Development of Semi-Crystalline Polymers in Sintering Processes”
SPE ANTEC (2014)
171 J. Puentes;
B. LaQua;
L. Iervolino;
K. Dahl;
M. Knott;
T. A. Osswald
”Review of Analitical Models of Anisotropy-Induce Spring Forward Effect Via FEA Simulation and Testing”
SPE ANTEC (2014)
170 W. Aquite;
N. Bentley;
D. Gramley;
N. Grundl;
A. Horan;
J. Kotes;
S. Kumar;
B. LaQua;
L. Iervolino;
L. Lopez;
J. Mallek;
M. McGuiness;
J. Mueller;
C. Perez;
J. Puentes;
M. Rademacher;
D. Ramirez;
R. Reader;
C. Ritt;
E. Ronning;
J. Shafer;
D. Tamilwanan;
J. Thurner;
B. Tobelmann;
G. Yilmaz;
T. A. Osswald
”Optimizing the Production of a Fiber Reinforced Composite Sailboat Via Vacuum Assisted Resin Infusion”
SPE ANTEC (2014)
169 R. Monroy;
M. Hinkamp;
T. Pfeifer;
J. Puentes;
C. Perez;
T. A. Osswald
”Method to Characterize Blowing Agent Concentration Effects during Polymer Processing”
SPE ANTEC (2014)
168 D. Ramirez;
S. Goris;
P. Schmitdke;
E. Baur;
T. A. Osswald
”Mechanistic Model to Determine Fiber Orientation Simulation Material Parameters”
SPE ANTEC (2014)
167 C. Schäfer;
W. Aquite;
T.A. Osswald
”Internal and free-surface viscoelastic flow simulations using the Corotational Maxwell constitutive model”
SPE ANTEC (2014)
166 S. Goris;
C. Perez;
T. A. Osswald
”Impact of Fiber Orientation Distribution within a D-LFT Strand on Warpage of a Compression Molded Part”
SPE ANTEC (2014)
165 N. El Barche;
M. V. Candal;
A. Yanev;
T. A. Osswald
”Experimental Study of Fiber Attrition Within o Long Fiber Glass-Reinforced PP under Controlled Conditions”
SPE ANTEC (2014)
164 Bechara, A., ;
Ramirez, D. ;
Onken, J. ;
Pérez, C. ;
Goris, S. ;
Londoño, A. ;
Osswald, T.A.
”Models for the Prediction of the Fiber Orientation and Fiber Length Distribution during Processing of Fiber-Filled Polymers”
International ECEMP (European Centre for Emerging Materials and Processes) Colloquium, Dresden (2013)
163 Lopez, L. ;
Ramirez, D. ;
Osswald, T.A.
”Fiber attrition and orientation productions of a fiber filled polymer through a gate - A mechanistic approach”
ICIPC Colloquium 2013 Proceedings, Medellín (2013)
162 Aquite, W. ;
Schafer, C. ;
Favero, J. ;
Osswald, T.A.
”Simulation of Micropelletization Mechanisms”
PPS-29 29th International Conference of The Polymer Processing Society, Nuremberg (2013)
161 Perez, C. ;
Goris, S. ;
Osswald, T.A.
”Study on the fiber properties of a LFT strand”
SPE Automotive Composites Conference, Ann Arbor (2013)
160 Cifuentes, S.C. ;
Benavente, R. ;
Osswald, T.A. ;
González-Carrasco, J.L.
”Processing and Characterization of Novel Melt Injected PLDA/Mg Composites”
EUROMAT 2013, Sevilla (2013)
159 Alshaya, A. ;
Petzold, S. ;
Eriten, M. ;
Osswald, T.A.
”Friction Coefficient Measurements Using a Timoshenko and Van Karman Device: Bulk Polymers”
SPE ANTEC (2013)
158 Pérez, C. ;
Ropers, S. ;
Ghandi, U. ;
Madapati, R. ;
Osswald, T.A.
”Fiber Length and Orientation DistributionMeasurement of a Charge for D-LFT Compression Molding”
SPE ANTEC (2013)
157 López, L. ;
Ramírez, D. ;
Osswald, T.A.
”Fiber Attrition and Orientation Productions of a Fiber-Filled Polymer Through a Gate: A Mechanistic Approach”
SPE ANTEC (2013)
156 Aquite, W. ;
Kelly, B.;
Burris, E. ;
Osswald, T.A.
”A Dimensional Analysis of the Micropelletization Process Using Rayleigh Disturbances”
SPE ANTEC (2013)
155 Puentes, J.;
Osswald, T.A.;
Schick, S. ;
Berg, J.,
”Optimizing Pipe Extrusion Dies Using CFD Simulation”
SPE ANTEC (2013)
154 Rojas G. ;
A.F. ;
Sánchez, K. ;
Osswald, T.A.
”Degradación y Estabilidad Térmica en el Reciclado de Polietileno de Alta Densidad de Diferente Grado”
XXXIII Convención Panamericacna de Ingenierías, UPADI 2012 - La Habana, Cuba (2012)
153 Rojas G. ;
A.F. ;
Sánchez, K. ;
Osswald, T.A.
”Reciclado de Polietileno de Alta Densidad de Diferente Grado”
XXXIII Convención Panamericacna de Ingenierías, UPADI 2012 - La Habana, Cuba (2012)
152 Ramírez, D. ;
López, I. ;
Estrada, O. ;
Osswald, T.A.
”Simulation of the Fountain Flow Effect by Means of the Radial Functions Method (RFM)”
SPE ANTEC (2012)
151 Aquite, W. ;
Osswald, T.A.
”Notes on the Micropellitization of Polymer Resins” SPE ANTEC (2012)
150 Restrepo-Zapata, N.C. ;
Osswald, T.A., ;
Hernández-Ortiz, J.P.
”Modeling and analysis of aliphatic epoxy resin with and without diffusion”
SPE ANTEC (2012)
149 Rudolph, N. ;
Osswald, T.A.
”High Precision Plastic Parts for Optical Applications by Compression Induced Solidification (CIS)”
44th CIRP International Conference on Manufacturing Systems (2011)
148 Osswald, T.A. ”Mechanistic Models for Fiber Flow, Fiber Orientation, Fiber Damage and Fiber Jamming,”
SPE TOPCON, Chicago, Best Paper Award (2011)
147 Osswald, T.A. ”Simulation von Mischvorgängen”
(Simulating Mixing Processes), Simulation + Kunststoff Munich, (2011)
146 Restrepo-Zapata, N.C.;
Osswald, T.A.;
Hernández-Ortiz, J.P.
”Cure kinetics of EPDM rubber and aliphatic epoxy resin - Modeling and Analysis”
SPE ANTEC (2011)
145 Mulholland, T.;
Sánchez, K.;
Moreno, A.;
Chan, N.;
García-Rodríguez, S.;
Osswald T.A.
"Characterization of Sintered PLA Scaffolds for Bone Tissue Engineering"
SPE ANTEC 2011
144 Eisenhardt S.;
Petzold, S.;
Wang. C.;
Osswald, T.A.
"Alternate Method in Polymer Friction Measurement Using a Timoshenko/van Karman Devise"
SPE ANTEC 2011
143 Pichl, F.;
Rudolph, N.;
Osswald, T.A.
"Effects of Temperature and Pressure on Viscosity During Injection Molding"
SPE ANTEC 2011
142 Engerer, M.;
Aquite, W.;
Launhardt, M.;
Rudolph, N.;
Osswald, T.A.
"Simulation of Micropelletizing Mechanisms"
SPE ANTEC 2011
141 Aquite, W.;
Launhardt, M.;
Rudolph, N.;
Osswald, T.A.
"Manufacturing of Micropellets Using Rayleigh Disturbances"
SPE ANTEC 2011
140 Naranjo, A.;
Noriega, M.;
Osswald, T.A.
"Comparison of the Melting Behavior of HDPE and PP in Single Screw Extruders"
SPE ANTEC 2011
139 López, I.;
Ramírez, D.;
Kurth, K.;
Rudolph, N.;
Osswald, T.A.
"Fiber Motion in Fountain Flow and its Relation to Fiber Free Regions at the Surface of Injection Molded Parts"
SPE ANTEC 2011
138 Rudolph, N.;
Ehrenstein, G.W.;
Osswald, T.A.
"New insights in pvT-behavior for high precision in Injection Molding"
SPE ANTEC 2010
137 Petzold, S.;
Wang, C.;
Osswald, T.A.
"Conjugated Polymer Photovoltaic Solar Cells -- Manufacturing and Increasing Performance"
SPE ANTEC 2010
136 Sanchez, K.;
Cruz, J.;
Osswald, T.A.
"Improvement of Mechanical Properties of Wood-Resin Composite Using a Continuous Impregnation Machine"
SPE ANTEC 2010
135 Aquite, W.;
Lopez, I.;
Osswald, T.A.
"A Dimensional Analysis of Viscous Heating in Runner Systems Using the Radial Functions Method"
SPE ANTEC 2010
134 Holmes, L.;
Favaro, J.;
Osswald, T.A.
"Modeling Three-Dimensional Secondary Flows in Non-Circular Ducts"
SPE ANTEC 2010
133 Holmes, L.;
Lopez, I.;
Osswald, T.A.
"Prediction of Secondary Flows in non-Circular Ducts Using the Radial Functions Method"
SPE ANTEC 2010
132 Ufer, J.;
Londoño, A.;
Eilbracht, S.;
Osswald, T.A.
"Experimental Study of Fiber-Matrix Separation, Fiber Density Distribution and Fiber Orientation in Fiber Suspensions"
SPE ANTEC 2010
131 Eilbracht, S.;
Osswald, T.A.
"Analyzing Fiber Matrix Separation and Fiber Orientation During Processing of Fiber Reinforced Composites Using a Mechanistic Model"
SPE ANTEC 2010
130 Kühnlein, F.;
Rietzel, D.;
Feulner, R.;
Osswald, T.A.
"Selektives Maskensintern - Hohe Effizienz durch breitbandigen, flächigen Energieeintrag"
Proceedings Rapid.Tech. 2009
129 Müller, T.;
Kühnert, I.;
Hülder, G.;
Osswald, T.A.
"In-Mould-Forming as a Novel Injection Moulding Process to Manufacture High-Performance Hybrid Composites"
SAMPE EUROPE 2009
128 Tsigkopoulos, T.;
Feulner, R.;
Hülder, G.;
Osswald, T.A.
"Analysis and development of fiber length maintaining and load case optimized LFT processes by means of an innovative experimental framework"
(23) 421-428, SAMPE EUROPE 2009
127 Kobes, M.O.;
Feulner, R.;
Krippner, S.;
Hülder, G.;
Osswald, T.A.
"The Accoustic Behavior of Thermoplastic Tribological pairings"
SPE ANTEC (2009)
126 Hülder, G.;
Osswald, T.A.
"Cure Kinetics of Thermoset Based Mortars for Bonded Anchors in Civil Engineering"
SPE ANTEC 2009
125 Heinle, C.;
Brocka, Z.;
Hülder, G.;
Ehrenstein, G.W.;
Osswald, T.A.
"Thermal Conductivity of Polymers Filled with Non-Isometric Fillers: A Process Dependent, Aisotropic Property"
SPE ANTEC 2009
124 Jungmeier, A.;
Kühnert , I.;
Ehrenstein, G.;
Osswald, T.A.
"Process Induced Properties of Micro Injection Molded Parts - New Aspects"
SPE ANTEC 2009
123 Lopez, I.D.;
Holmes, L.;
Osswald, T.A.
"Simulation of Extrusion Processes Using the Radial Function Method (RFM) Considering Shear Thinning and Viscoelastic Effects"
In review, SPE ANTEC (2009)
122 Müller, T.;
Kühnert, I.;
Osswald, T.A.
"Injection Molding of High-Performance Hybrid Composites in Series-Production"
SPE ANTEC 2009
121 Petzold, S.;
Khazaal, A.;
Grant, J.;
Wang, C.;
Osswald, T.A.
"Design and Manufacturing Organic Conjugated Polymer Photovoltaoc Solar Cells"
SPE ANTEC 2009
120 Orozco, R.;
López, I.;
Osswald, T.A.
"Stress Analysis of Pin-Joined Composite Laminate Plates Using Radial Basis Functions Method with Non-Linear Material Models"
SPE ANTEC 2009
119 Londoño-Hurtado, A.;
Marks, L.;
Ziegmann, G.;
Osswald, T.A.
"Knitline Development in the Compression Molding of Sheet Molding Compound"
SPE ANTEC 2009
118 Osswald, T.A. "Simulation der Verarbeitung von Kurzfaserverbund-Kunststoffe"
10. Symposium und Jubiläumsfeierlichkeiten, Clausthal, Germany, November 3, 2008
117 Rietzel, D.;
Kühnlein, F.;
Wendel, B.;
Feulner, R;
Hülder, G;
Osswald, T.A.
"Enhanced Range of Plastics for Selective Laser Sintering, Serving Different User Profiles and also Consumer and Industry Requests."
Euro-uRapid 2008 Proceedings, Berlin, 209-216 2008
116 Roldán, A.;
Sweitzer, N.K.;
Osswald, T.A.;
Chesler, N.C.
"Fluid Structure Interaction Analysis of Blood Flow Thorugh Mechanical Heart Valves"
Proceedings of the ASME 2007 Summer Bioengineering Conference (SBC 2008) Marco Island, FL, June 24-29, 2008
115 Roldán, A.;
Haughton, V.;
Osswald, T.A.;
Chesler, N.
"Computational Analysis of Cerebrospinal Fluid Flow in the Normal and Obstructed Suabrachnoid Space"
Proceedings of the ASME 2007, Summer Bioengineering Conference (SBC 2008) Marco Island, FL, June 24-29, 2008
114 Roldán, A.;
Haughton, V.;
Osswald, T.A.;
Chesler, N.
"Cause of Hyperkinetic CSF flow in Chiari I Malformation: Effect of Subarachnoid Space Dimensions on CSF through the Foramen Magnum"
ASNR 46th Annual Meeting & NER Foundation Symposium 2008. New Orleans, LA. May/June 2008
113 Roldán, A.;
Haughton, V.;
Osswald, T.A.;
Chesler, N.
"Cerebrospinal Fluid Flow in the Chiari I Malformation - Computational Approach using MR-Based Geometries"
Fifth International Bio-Fluid Symposium and Workshop. Pasadena, CA. February 2008
112 Roldán, A.;
Osswald, T.A.;
Haughton, V.
"CSF flow in the Chiari I malformation modeled with computational fluid dynamics"
Syringomyelia 2007, Rugby England Oct 24, 2007
111 Londoño-Hurtado, A.;
Osswald, T.A.
"Computer Prediction of the Behavior of Fiber-Reinforced Composites During Molding"
SPE Automotive Composites Conference, Dearborn, Michigan, September 16-18, 2008
110 Orozco, R.;
López, I.D.;
Rowlands, R.;
Osswald, T.A.
"Stress Analysis of an Orthotropic Plate Joint By RFM"
SPE ANTEC 2008
109 Ralston, B.E.;
Osswald, T.A.
"Mechanical Properties and Moisture Sensitivity of Virgin and Recycled Soy-Cornstarch Plastics"
SPE ANTEC 2008
108 Cruz, J.C.;
Esch, S.K.;
Emmons, A.;
Osswald, T.A.
"Pressure Effects on Final Mechanical Properties of Unsaturated Polyester Resin"
SPE ANTEC 2008
107 Hoffman, S.;
López, I.D.;
Bednar, A.;
Osswald, T.A.
"Filling Simulation and Temperature Prediction in Hot Runner Systems"
SPE ANTEC 2008
106 Osswald, T.A. Invited Talk: "Simulation in der Kunststoffverarbeitung"
Proceedingsof Fachtagung Montagspritzgiessen, Fürth, Germany, November 2007
105 Osswald, T.A. Plenary Lecture: "A Historical Perspective on Thermosets - The First 100 Years"
Thermosets 53, Madison, October 2007
104 Roldán, A.;
Chesler, N.C.;
Osswald, T.A.;
Sweitzer, N.K.
"Simulation of blood flow through mechanical heart valves using a Meshless Technique"
AHA Scientific Sessions 2007, Orlando, FL, November 2007
103 Roldán, A.;
Wentland, A.;
Weiben, O.;
Haughton, V.;
Osswald, T.A.;
Chesler, N.C.
"CFD Modeling for Patient-specific Analysis of Cerebrospinal Fluid Flow"
Proceedings of the ASME 2007 Summer Bioengineering Conference (SBC 2007) Keystone, CO, June 2007
102 Roldán, A.;
Sweitzer, N.K.;
Osswald, T.A.;
Chesler, N.C.
"Numerical simulation of blood flow through mechanical heart valves using meshless techniques"
Proceedings of the ASME 2007 Summer Bioengineering Conference (SBC 2007) Keystone, CO, June 2007
101 Roldán, A.;
Wentland, A.;
Weiben, O.;
Haughton, V.;
Osswald, T.A.
"Cerebrospinal Fluid Flow in the Chiari I Malformation Modeled with Computational Flow Dynamics"
ASNR 45th Annual Meeting, Chicago, IL, June 2007
100 Roldán, A.;
Wentland, A.;
Weiben, O.;
Block, W. F.;
Klärs, J. L.;
Haughton, V.;
Osswald, T.A.
"Numerical Modeling of CSF Flow in Patient - Specific Anatomical Models"
2007 Scientific meeting proceedings Annual meeting (ISMRM - ESMRMB 2007) Berlin, Germany, May 2007
99 Cruz, J.C.;
Kemper, M.;
Osswald, T.A.
"Monitoring Curing Reactions of Thermosets Under High Pressure by Use of Raman Spectroscopy"
SPE ANTEC 2007
98 López, I.D.;
Klaiber, F.;
Osswald, T.A.
"Analysis of Viscous Heating Effects in a Presure Slit Rheometer Using the Radial Functions Method (RFM)"
SPE ANTEC 2007
97 Londoño, A.;
Osswald, T.A.
"Fiber Jamming and Fiber Matrix Separation During Processing of Fiber Reinforced Composites"
SPE ANTEC 2007
96 Osswald, T.A. Keynote Lecture: "A Historical Perspective on Thermosets - The First 100 Years"
SPE ANTEC 2007
95 Osswald, T.A. Keynote Lecture: "A Historical Perspective on Thermosets - The First 100 Years"
SPE Thermosets TOPCON, Rayleigh, March 2007
94 Osswald, T.A.;
Camacho, E.
"A Study of Injection Molded Liquid Silicone Rubber for Syringe Applications"
PHARMAPAK, Paris, 2007
93 Roldán, A.;
Sweitzer, N;
Chesler, N.;
Osswald, T.A.
"Simulation of Blood Flow Through a Bi-leaflet Mechanical Heart Valve Using the Boundary Elements Method"
BMES - 2006. Chicago, IL
92 Klaiber, F.;
Osswald, T.A.
"Development of a High Pressure Slit Rheometer"
SPE ANTEC 2006
91 Cruz, J.C.;
Kemper, M.;
Osswald, T.A.
"Monitoring UP Curing Reactions by Raman Spectroscopy"
SPE ANTEC 2006
90 Ralston, B.E.;
Osswald, T.A.
"Viscosity of Soy Protein Plastics as Determined by Screw-Extrusion Through a Capillary Die"
SPE ANTEC 2006
89 Newman, N.;
Hertel, R.;
Osswald, T.A.
"Health and Environmental Effects of the Production, Use, and Disposal of Polyvinyl-chloride"
Society of Plastics Engineers, GPEC, Atlanta, 2006
88 Ralston, B.E.;
Wochner, E.;
Osswald,T.A.
"Effects of crosslinkers, glycerol, and processing temperature on properties of soy protein based plastics"
Society of Plastics Engineers, GPEC, Atlanta, 2006
87 Dattner, M.;
Salguero, J.;
Schneider, D.;
Osswald T.A.
"Recycled Electronic Housings Mixed ABS Material and Flame Retardant Identification Using Near-IR and Mechanical Testing"
Society of Plastics Engineers, GPEC, Atlanta, 2006
86 Roldán, A.;
Chesler, N.;
Bustamante, J.;
Osswald T.A.
"Simulation Of Blood Flow And Deformations Of Mechanical Heart Valves Using Boundary Integral Techniques"
XXth Congress of the International Society of Biomechanics August 1-5, 200)
85 Osswald, T.;
Dattner, M.
"Processability and Properties of Plastics Recovered from Retired Electronic Housings"
SPE ANTEC 2005
84 Ralston, B.E.;
T.A. Osswald
Society of Plastics Engineers Global Plastics Environmental Conference (GPEC), February 23-25, 2005
83 Osswald, T.;
Dattner, M.
"Processing Solutions and Market Applications for Mixed ABS"
E-Scrap, 2004, Minneapolis, USA, Oct. 19, 2004
82 Osswald, T.A. "Controlling and Modeling Cure Reactions for Thermosetting Materials"
50th Annual Thermosetting Conference, October 14-15, 2004
81 Ralston, B.E.;
Osswald, T.A.;
Clemons, C.;
Caulfield, D.;
Schmitz. M.
"Natural Fibers, Bioplastics and Biodegradable Composites"
Presented at N-Fiberbase Conference, Koeln, Germany, June 9-10, 2004
80 García, S.;
Roldán, A.;
Hernandez, J.P.;
Osswald T.A.
"Dimensional Analysis and Scaling Approach for Thin Wall Injection Molding"
SPE ANTEC 2004
79 Ralston, B.E.;
Osswald, T.A.
SPE ANTEC 2004, 3766-3770
78 Osswald, T.A. "Thermoset Processing - History, Present and Future";
Keynote Lecture, Thermoset Division Conference, SPE, March 2004)
77 Osswald, T.A. "Compression Molding - Large Composite Structures"
Conference on Large Surface Parts, Neue Materialien Fürth, Fürth, Germany, October, 2003
76 Osswald, T.A. "Compression Molding - The Past, the Present and the Future"
Keynote Lecture, Composites Division, SPE Technical Conference, Nashville, May 2003
75 Hernandez, J.P.;
Chandra, A.;
Winardi, A.;
Turng, L-S;
Osswald, T.A.;
Gramann, P.
"Modeling Cell Nucleation During Microcellular Injection Molding"
SPE Annual Technical Conference, Nashville, May 2003
74 Hernandez, J.P.;
Tschohl, K.A.;
Wagner, H.;
Osswald, T.A.
"A Novel Fiber Orientation Evaluation Using a Directional Imagine Processing Technique"
SPE ANTEC 2003
73 Wilichowski, P.A.;
Lopez, L.M.;
Osswald, T.A.
"Numerical Simulation of the Curing Reaction during Pultrusion Processes with a Diffusion Controlled Model"
SPE ANTEC 2003
72 Hadiprajitno, S.;
Hernandez, J.P.;
Osswald T.A.
"Developing Time-Temperature-Transformation Diagrams for Unsaturated Polyester using DSC Data"
SPE Technical Conference, Nashville, May, 2003.
71 Wacker, M.;
Ehrenstein, G.W.;
Osswald, T.A.
"Das TTT-Diagramm zur Charakterisierung des Härtungsverlaufes von Harzsystemen"
GEFTA, Thermische Analysenmethoden in der Materialwissenschaft - Anwendungen in Fahrzeugbau und Luftfahrtindustrie, Munich 2001
70 Yuan, M.;
Osswald, T.A.;
Castro, J.M.;
Lee, L.J.
"Numerical Investigation of the continuous Electronic Laminate Processing"
SPE ANTEC 2001
69 Sierra, J.D.;
Ospina, S.;
Montoya, N.;
Noriega, M.P.;
Osswald, T.A.
"Characterization of Polyethylene Blends by Using Novel Techniques such as the Successive Self-Nucleation and Annealing (SSA) and the Fourier Self-Convolution IR Spectroscopy (FSD-IR)"
SPE Technical Conference, Orlando, May 2000
68 Schemenauer, J.J.;
Osswald, T.A.;
Sanadi, A.R.;
Caufield, D.F.
"Melt Rheological Properties of Natural Fiber-Reinforced Polypropylene"
SPE ANTEC 2000
67 Viego, J.;
Theriault R.;
Osswald, T.A.
"3D Curing Simulation of Thick Thermoset Composites"
SPE ANTEC 2000
66 Rauwendaal, C.;
Rios, A.C.;
Osswald, T.A.;
Gramann, P.J.
"Experimental Study of a New Dispersive Mixer"
SPE ANTEC 1999
65 Rios, A.C.;
Osswald, T.A.
"Novel BEM Simulation of Mixing in Polymer Flows Including Non-Linear Effects"
SPE ANTEC 1999
64 Theriault, R.;
Osswald, T.A.
"Process Modeling of Copper Clad Laminates"
SPE ANTEC 1998
63 Noriega, M.P.;
Rios, A.C.;
Osswald, T.A.
"An Experimental Study of Variuos Mixing Sections in a Single Screw Extruders"
SPE ANTEC 1998
62 Rios, A.C.;
Osswald, T.A.
"Comparitive Study of Rhomboidal Distributive Mixing Sections Using Computer Simulation"
SPE ANTEC 1998
61 Rauwendaal, C.;
Osswald, T.A.;
Gramann, P.J.;
Davis, B.A.
"A New Dispersive Mixer for Single Screw Extruders"
SPE ANTEC 1998
60 Gramann, P.J.;
Noriega, M.P.;
Rios, A.C.;
Osswald, T.A.
"Understanding a Rhomboidal Distributive Mixing Head Using Computer Modeling and Flow Visualization Techniques"
SPE ANTEC 1997
59 Theriault, R.P.;
Stradins, L.U.;
Osswald, T.A.
"Properties of Thermosetting Polymers During Cure"
SPE ANTEC 1997
58 Christensen, S.K.;
Davis, B.A.;
Hutchinson, B.;
Sun, E.M.;
Osswald, T.A.
"Fiber Matrix Separation in Ribbed SMC and BMC Parts"
SPE ANTEC 1997
57 Christensen, S.K.;
Davis, B.A.;
Theriault, R.P.;
Osswald, T.A.
"Thermomechanical Behavior of SMC Parts with Integrated Ribs"
ICE 97, Nashville, January 1997
56 Theriault, R.P.;
Gramann, P.J.;
Osswald, T.A.
"Modeling of Extrusion Processes Using Boundary Integral Methods"
AICHE Annual Meeting, Chicago, November, l996
55 Davis, B.A.;
Gramann, P.J.;
Florez, W.F.;
Theriault R.P.;
Osswald, T.A.
"Investigation of Non-Linear Flows in Polymer Mixing Using the Boundary Integral Method"
18th International Conference on Boundary Elements, Braga, Portugal, September, 1996
54 Davis, B.A.;
Osswald, T.A.
"Simulating Non-Linear Flows in Polymer Flows Using the Dual Reciprocity Boundary Integral Method"
Polymer Processing Society, 12h Annual Meeting, Sorrento, Italy, June 1996
53 Davis, B.A.;
Osswald, T.A.
"Investigation of Non-Linear Flows in Polymer Mixing Using the Boundary Integral Method"
SPE Technical Conference, Indianapolis, May 1996
52 Gramann, P.J.;
Rauwendaal, C.;
Tellez, G.;
Osswald, T.A.
"Analyis of Flow in Screw Extruders, Effect of Kinematic Conditions"
SPE Technical Conference, Indianapolis, 128, May 1996
51 Gramann, P.J.;
Theriault, R.P.;
Osswald, T.A.
"Evaluating Mixing of Complex Systems Using the Boundarty Integral Method"
Society of Rheology Annual Conference, Sacramento, October 1995
50 Davis, B.A.;
Osswald, T.A.
"A Non-Newtonian Simulation Method for Moving Boundary Problems Using DRM/BEM"
17th International Conference on Boundary Elements, Madison, July 1995
49 Gramann, P.J.;
Rios, A.C.;
Osswald, T.A.
"Comparative Study of Mixing in Twin Screw Extruders Using the Boundary Element Method"
17th International Conference on Boundary Elements, Madison, July 1995
48 Davis, B.A.;
Osswald, T.A.
"Non-Netwonian Simulation Method for Moving Boundary Problems"
SPE Annual Technical Conference, 1146, Boston, May 1995
47 Gramann, P.J.;
Rios, A.C.;
Osswald, T.A.
"Comparative Study of Mixing in Twin Screw Extruders"
SPE Annual Technical Conference, 108, Boston, May 1995
46 Osswald T.A.;
Theriault, R.P.
"Polymer Flow length Simulation During Injection Mold Filling"
SPE Annual Technical Conference, 546, Boston, May 1995
45 Sun, E.M.;
Davis, B.A.;
Osswald, T.A.
"Modeling and Simulation of Thick Compression Molded Parts"
50h Annual Conference SPI Composites Institute Proceedings February, 1995. Best Research Paper Award out of approximately 100 papers
44 Osswald T.A.;
Sun, E. M.
"Predicting Shrinkage and Warpage of Thin Compression Molded SMC Parts"
Proceedings of the 10th Annual ASM/ESD Advanced Composites Conference/Exposition, 321-324, November, 1994
43 Davis, B.A.;
Rios, A.C.;
Stradins, L.U.;
Gramann, P.J.;
Osswald, T.A.
"Computer Modeling and Optimization of Polymer Processes Using the Boundary Element Method"
Advanced Computer Aided Engineering of Polymer Processing, 55-61, ASME WAM, November, 1994
42 Osswald, T.A.;
Sun, E.M.
"Experimental Verification on Simulating Shrinkage and Warpage of Thin Compression Molded SMC Parts"
Advanced Computer Aided Engineering of Polymer Processing, 239-245, ASME WAM, November, 1994
41 Stradins, L.;
Theriault R.;
Osswald, T.A.
"Hands on Polymer Processing Laboratory"
Annual Conference and Exposition, American Society for Engineering Education, Edmonton, Canada, June 1994
40 Osswald, T.A.;
Sun, E.M.;
Tseng, S.C.;
Gramann, P.J.
"Experimental Verification on Simulating Shrinkage and Warpage of Thin Compression Molded SMC Parts"
SPE ANTEC 1994, 914-917. Best Paper Award, SPE Thermoset Division out of approximately 50 papers
39 Biswas, A.;
Davis, B.A.;
Gramann, P.J.;
Stradins, L.U.;
Osswald, T.A.
"Simulating Mixing in the Extrusion Process"
SPE ANTEC 1994, 336-340
38 Osswald, T.A.;
Sun, E.M.;
Tseng, S.C.
"Experimental Verification on Simulating Shrinkage and Warpage of Thin Compression Molded SMC Parts"
49th Annual Conference SPI Composites Institute Proceedings, 10-A, Cincinnatti, OH, February 1994. Best Research Paper Award out of approximately 90 papers
37 Davis, B.A.;
Gramann, P.J.;
Mätzig, J.C.;
Osswald, T.A.
"Simulating Flow and Heat Transfer in Polymer Processing Using BEM/DRM"
Boundary Element Technology VIII, 45-56, Vilamoura, Portugal, November 1993
36 Spiegelhoff, T.J.;
Osswald, T.A.
"Modeling and Simulation of High Reynolds Number Flows During Reaction Injection Mold Filling"
SPE ANTEC, 2415-2420
35 Gramann, P.J.;
Osswald, T.A.
"Simulating the Flow and Heat Transfer Effects During Polymer Processing Using the Boundary Element Method"
SPE ANTEC, 2774-2781
34 Gramann, P.J.;
Stradins, L.;
Osswald, T.A.
"Simulating Flow with Heat Transfer Effects and Multi-Viscous Polymer Blends During Polymer Processing Using The Boundary Element Method"
Polymer Processing Society, 9th Annual Meeting, Manchester, UK, April 1993
33 Spiegelhoff, T.;
Osswald, T.A.
"Modeling and Simulation of High Reynolds Number Flows During Reaction Injection Mold Filling"
Polymer Processing Society, 9th Annual Meeting, Manchester, UK, April 1993
32 Tseng, S.-C.;
Osswald, T.A.
"Prediction of Shrinkage and Warpage of Fiber Reinforced Thermoset Composite Parts"
48th Annual Conference SPI Composites Institute Proceedings, 10-A, Cincinnatti, OH, February 1993. Best Research Paper Award out of approximately 110 papers
31 Gramann, P.J.;
Mätzig, C.J.;
Osswald, T.A.
"Simulating the Mixing of Polymer Blends Using the Boundary Element Method"
XI International Congress on Rheology, Brussels, Belgium, August 1992
30 Mätzig, C.J.;
Gramann, P.J.;
Osswald, T.A.
"The Dual Reciprocity Method for Heat Transfer in Polymer Processing"
Heat Transfer 92, Milan, Italy, July 1992
29 Gramann, P.J.;
Mätzig, C.J.;
Osswald, T.A.
"Simulating the Mixing of Polymer Blends Using the Boundary Element Method"
BETECH92, Albuquerque, June 1992
28 Gramann, P.J.;
Mätzig, J.C.;
Osswald, T.A.
"Simulating the Non-isothermal Mixing of Polymer Blends Using the Boundary Element Method"
SPE Annual Technical Conference, 355, Detroit, May 1992
27 Igl, S.A.;
Osswald, T.A.
"A Study of the Thermoformability of Woodfiber Filled Polyolefin Composites"
SPE Annual Technical Conf., Detroit, May 1992
26 Tseng, S.C.;
Osswald, T.A.
"Predicting Shrinkage and Warpage of Fiber Reinforced Composite Parts"
SPE Annual Technical Conf., Detroit, May 1992
25 Kühl, N.;
Osswald, T.A.
"A Finite Element Model and Simulation of the Deformation of Multi-axial Warp Knits"
SPE Annual Technical Conference, 553, Detroit, May 1992
24 Osswald, T.A.;
Gramann, P.J.;
Mätzig, C.J.
"Simulating the Mixing of Polymer Blends Using the Boundary Element Method"
Polymer Processing Society, 8th Ann. Conference, New Delhi, India, March 1992
23 Tseng, S.C.;
Osswald, T.A.
"Modeling and Simulation of the Thermomechanical Behavior of Fiber Reinforced Composite Parts"
Polymer Processing Society, 8th Ann. Conference, New Delhi, India, March 1992
22 Tseng, S.C.;
Osswald, T.A.
"Thermomechanical Behavior of Fiber Reinforced Composite Parts"
ASME: Heat and Mass Transfer in Solidification Processing, Atlanta, December,1991
21 Igl, S.A.;
Osswald, T.A.
"A Study of the Thermoforming Process of Woodfiber Filled Polyolefin Sheets"
Woodfiber-Plastic Composites Conference, Madison, April, 1991
20 Gramann, P.J.;
Osswald, T.A.
"Simulation of the Mixing of Natural Fiber Filled Polymer Composites: A Boundary Element Approach"
Woodfiber-Plastic Composites Conference, Madison, April, 1991
19 Tseng, S.C.;
Osswald, T.A.
"A Study of the Thermomechanical Behavior of Fiber Reinforced Composite Parts"
Polymer Processing Society, 7th Ann. Conference, Hamilton, Canada, April, 1991
18 Cohnen, W.;
Jin, Y.S.;
Osswald, T.A.
"Modeling and Simulation of High Renolds' Number Flows During Reaction Injection Mold Filling"
Polymer Processing Society, 7th Ann. Conference, Hamilton, Canada, April, 1991
17 Osswald, T.A. "A Study of the Thermomechanical Behavior of Fiber Reinforced Composites"
ASME: Processing of Polymers and Polymetric Composites, 103-117, 1990
16 Osswald, T.A. "Analysis and Simulation of the Nonisothermal, Non-Newtonian Flow of Sheet Molding Compound"
62nd Annual Meeting of the Society of Rheology, 18, Santa Fe, October 1990
15 Osswald, T.A. "A Review of Boundary Element Simulation of Compression Mold filling"
Proceedings of the 5th International Conference on Boundary Element Technology, 277-293, Newark, DE, July 1990
14 Osswald, T.A. "Measurement, Analysis and Simulation of the Nonisothermal, Non- Newtonian Flow of Sheet Molding Compound"
Polymer Processing Society, 6th Annual Meeting, Nice, France, April 1990
13 Osswald, T.A.;
Michaeli, W.;
Specker, O.
"Simulation of Compression Molding and Part Performance- an Integrated CAE-Approach"
45th Annual Conference-SPI Composites Institute Proceedings, Washington D.C., February 1990
12 Osswald, T.A.;
Matyssek, J.R.;
Specker, O.
"Prediction of Shrinkage and Warpage in Sheet Molding Compound (SMC) Parts"
45th Annual Conference-SPI Composites Institute Proceedings, Washington D.C., February 1990
11 Specker, O.;
Michaeli, W.;
Osswald, T.A.
"Modell zur Fließberechnung beim Verpressen von Zuschnittpaketen aus SMC"
German Rheological Society Annual Conference, Darmstadt, West Germany, April 1989
10 Osswald, T.A.;
Michaeli W.;
Mahlke, M.
"Messungen, Analyze und Simulation der nichtisothermen und instationären Strömung von Sheet Molding Compound (SMC)"
German Rheological Society Annual Conference, Darmstadt, Germany, April 1989
9 Osswald, T.A. "Spritzgießen und Pressen verstärkter Kunststoffe"
IKV Kuststofftechnisches Kolloquium, 14, 333-364, Aachen, Germany, March 1988
8 Osswald, T.A. "Simulation der Werkzeugfüllung und Berechnungder Faserorientierung in SMC-Preßbauteilen"
IKV Fachbeiratsgruppe Verstärken, Aachen, Germany, 1988
7 Osswald, T.A.;
Tucker, C.L.
"Compression Mold Filling Simulation for Non-planar Parts Using the Finite Element/Control Volume Approach"
Polymer Processing Society, 3rd Ann. Conference, Stuttgart, West Germany, April 1987
6 Osswald, T.A.;
Tucker, C.L.
"A Boundary Element Simulation of Compression Mold Filling"
Polymer Processing Society, 2nd Ann. Conference, Montreal, Canada, April 1986
5 Tucker, C.L.;
Osswald, T.A.;
Advani, S.G.
"Processing- Structure Predictions for Short Fiber Composites"
NSF Manufacturing Research Conference Proceedings, 1986
4 Comer, J.J.;
Osswald, T.A.
"A Unique Strength of Materials Laboratory"
ASEE Annual Conference Proceedings, 1986
3 Osswald, T.A.;
Tucker, C.L.
"Processing of Short Fiber Composites"
NSFManufacturing Research Conference, Madison, WI, May 1985
2 Osswald, T.A.;
Tucker, C.L.
"An Automated Simulation of Compression Mold Filling for Complex Parts"
SPE Tech Papers, 31, 169-172, Washington, D.C., May 1985
1 Osswald, T.A. "An Automated Simulation of Compression Mold Filling for Complex Parts"
SAMPE, Detroit, December 1984